Arduino Uno R3 Based RFID system configuration to assign a master tag, and Permission to other RFID tag for Door Access. The system will allow only given door access on scanning the right tag and on scanning of the wother tag, the system will denied access. There will be a master tag that will be used to add/remove tags in the RFID system. The saved tags will saved remain even after powering off the Device. To reset the system is by using the Reset button that will erase all the data in the EEPROM. EEPROM has roughly 100, 000 limited Write cycle.
Arduino based RFID Door access control
وحدة SKU: A02
9,000.00 ₹ سعر عادي
5,400.00 ₹سعر البيع